Do all for safety, for a safe world!
Tel:+86-0790-6000119 | E-mail:
EnglishAfrikaansالعربيةবাংলাDanskSuomiFrançaisDeutschעבריתMagyarBahasa IndonesiaItaliano한국어Bahasa MelayuPortuguêsEspañolTürkçeاردوTiếng Việt

Fire Alarm System for Aerosol

» PRODUCT » Fire Alarm System for Aerosol

Aerosol Supporting Equipment-Automatic Fire Detection and Alarm System

A qualified control system is the perfect partner for aerosol fire extinguishing systems, and their relationship is like that of a wife and husband.

  • Specifications
  • Main Features
  • Application
  • Other Information

The aerosol fire extinguishing device itself is also a device that can automatically detect fires, so for small space fires, the aerosol itself can automatically use its built-in thermal line or glass ball to detect fires, which is very convenient.

But if the protected space is relatively large, then a fire alarm system will need to be used to support it.

Below, we will focus on introducing the specialized aerosol fire alarm and detection system, and their parameters:


The fire control panel, also named the gas extinguishing release control panel, is the central processing unit or heart of the alarm system, all other fire alarm components including a heat detector, smoke detector, manual call point, and abort switch must be connected to the system through it.

  • Model number: AW-GEC-2169.
  • Panel size: 350*280*112.5 mm.
  • AC input power: 100-200, 50HZ.
  • DC output from the power supply board: 24VDC (24±5) and 5VDC (5±0.1).
  • The voltage for MCU: is 5V.
  • Current @ 24VDC from PSE: less than 450mA (standby current).
  • Maximum current from PSE: 3 Ampere (except battery charge current).
  • Battery discharge current: Maximum 3.15 Ampere current limited.
  • Auxiliary power output: 24 VDC, maximum 200mA with current limited.
  • Detector numbers in each zone: 16 pieces.
  • Max detector numbers per CIE: 64 pieces.
  • Zone alarm current: 6 to 27 mA.
  • Communication ports(terminals): 2 wires RS 485 bus systems.
  • EOL resistors for zone input and output: 6.8KΩ/1W.
  • Operating temperature range: -5 to +45℃.
  • Humidity: 5% to 95%, non-condensing.
  • Weight of the panel: 9.9 kilograms with batteries, and 8.2 kilograms without batteries.


Strobe and horn also named strobe sounder,

  • Item: AW-CSS-2166-2.
  • Size: 151*115*51 mm.
  • Working volt and current: DC 12 to 24 V and current less than 60 mA.
  • Flash period: less than 1 seconds.
  • Alarm sound: more than 100 dB at 1 meter.
  • The life span of the flash light: is more than 40000 times.
  • Alarm sounder type: Ambulance, Police car, Fire truck.
  • Service lifetime: 10 years.


  • Item: AW-CSD-381.
  • Specification: 100*100*48 mm.
  • Volt: 12 or 24 Volt.
  • Wiring: the promise of two bus systems zone- and zone+.
  • Relay output: 0.5 A at 24 VDC.
  • Weight: 115 grams.


  • Part number: AW-CTD-382.
  • Standby current: less than 20 uA.
  • The maximum alarm current: is less than 15 mA.
  • Fix temperature alarm: 57℃, 68 ℃ etc.
  • Working temperature: -10 to +60℃.
  • Relative humidity: 95% non-condensing.


  • Style number: AW-CBL-2166-A.
  • Diameter: 150*61 mm.
  • Work voltage: 20 to 28 VDC.
  • Work current: maximum 60 mA.
  • Volume: more than 68 dB.
  • Weight: 900 grams.


  • Model: AW-GRS2158.
  • Operation volt: DC or AC 24 volt, non-polarized.
  • Working current: less than 70mA under 24 VDC.
  • Flash time: 1.2 to 1.8 seconds.
  • Matching panel: AW-GEC2169 gas fire control panel.


  • Model: AW-GD210 AND AW-GD202.
  • Dimension:100*100*98 mm.
  • Function: start and abort.

All above components can form a complete fire alarm and detection system, and then work together with aerosol systems.

Reference standards: ISO 7240-1:2014(en)

The following are the main features of fire alarm systems:

  • This fire alarm system is specially designed for gas-type suppression generators, including FM200, Novec 1230, aerosol, dry chemical, foam, and water mist systems.
  • Each component has specific parameters and specifications, and the components are compatible and cooperate.
  • All components must be connected to the controller, which serves as the central processing unit.
  • All components are with small dimensions, able to save installation space as much as possible.
  • Highly integrated system with high tactile sensitivity.
  • The detection components cooperate and do not interfere with each other.
  • The system has a 30-second delay function. Once a fire is detected, it can be delayed for 30 seconds, during which people can quickly escape.

It can be applied in places where gas fire extinguishing systems can be installed, such as:

  • Computer room.
  • data processing room.
  • high-rise buildings.
  • Historical archives.
  • Closed parking lot.
  • Hotels and restaurants.
  • Power generator room.
  • Genset room.
  • Hazardous Product Room.
  • Wind turbine.
  • Vehicles engine room.
  • Braking zone.
  • Power supply room.
  • Meeting room.
  • Cupboard.
  • Backup generator room.
  • Hydraulic system room.

Each unit of the fire alarm system has its unique advantages and characteristics, For more detailed information, please contact the supplier to request a PDF format file.

Usually, an aerosol fire extinguishing system project also requires a complete fire alarm and detection system.

Jiangxi Aware Fire Technology Co., Ltd can provide a one-stop service, for the installation and system debugging of fire suppression and fire alarm systems.

Fire Alarm System for Aerosol

Enquiry Form ( we will get back you as soon as possible )


1 + 5 = ?

Maybe you like also