Adakah semua untuk keselamatan, untuk dunia yang selamat!
Tel:+86-0790-6000119 | E-mel:
EnglishAfrikaansالعربيةবাংলাDanskSuomiFrançaisעבריתहिन्दी; हिंदीMagyarBahasa Indonesia한국어Bahasa MelayuPortuguêsEspañolTürkçeاردوTiếng Việt
 Edit Terjemahan

Sistem Penggera Kebakaran untuk Aerosol

» PRODUK » Sistem Penggera Kebakaran untuk Aerosol

Peralatan Penyokong Aerosol-Pengesanan Kebakaran Automatik dan Sistem Penggera

A qualified control system is the perfect partner for aerosol fire extinguishing systems, and their relationship is like that of a wife and husband.

  • Spesifikasi
  • Main Features
  • Application
  • Other Information

The aerosol fire extinguishing device itself is also a device that can automatically detect fires, so for small space fires, the aerosol itself can automatically use its built-in thermal line or glass ball to detect fires, which is very convenient.

But if the protected space is relatively large, then a fire alarm system will need to be used to support it.

Below, we will focus on introducing the specialized aerosol fire alarm and detection system, and their parameters:


panel kawalan kebakaran, also named gas extinguishing release control panel, it is the central processing unit or heart of the alarm system, all other fire alarm components include heat detector, pengesan asap, titik panggilan manual, abort switch etc must be connected to the system through it.

  • Model number: AW-GEC-2169.
  • Panel size: 350*280*112.5 mm.
  • AC input power: 100-200, 50HZ.
  • DC output from the power supply board: 24VDC (24±5) and 5VDC (5±0.1).
  • The voltage for MCU: 5V.
  • Current @ 24VDC from PSE: less than 450mA (standby current).
  • Maximum current from PSE: 3 Ampere (except battery charge current).
  • Battery discharge current: Maximum 3.15 Ampere current limited.
  • Auxiliary power output: 24 VDC, maximum 200mA with current limited.
  • Detector numbers in each zone: 16 kepingan.
  • Max detector numbers per CIE: 64 kepingan.
  • Zone alarm current: 6 kepada 27 mA.
  • Communication ports(terminals): 2 wires RS 485 bus systems.
  • EOL resistors for zone input and output: 6.8KΩ/1W.
  • Operating temperature range: -5 to +45℃.
  • Humidity: 5% kepada 95%, non-condensing.
  • Weight of the panel: 9.9 kilograms with batteries, 8.2 kilograms without batteries.


Strobe and horn also named strobe sounder,

  • Perkara: AW-CSS-2166-2.
  • Saiz: 151*115*51 mm.
  • Working volt and current: DC 12 kepada 24 V and current less than 60 mA.
  • Flash period: kurang daripada 1 saat.
  • Alarm sound: lebih daripada 100 dB at 1 meter.
  • Life span of the flash light: lebih daripada 40000 time.
  • Alarm sounder type: Ambulance, Police car, Fire truck.
  • Service life time: 10 tahun.


  • Perkara: AW-CSD-381.
  • Specification: 100*100*48 mm.
  • Volt: 12 atau 24 Volt.
  • Wiring: the promise of two bus systems zone- and zone+.
  • Relay output: 0.5 A at 24 VDC.
  • Berat: 115 gram.


  • Part number: AW-CTD-382.
  • Standby current: kurang daripada 20 uA.
  • The maximum alarm current: kurang daripada 15 mA.
  • Fix temperature alarm: 57℃, 68 ℃ etc.
  • Suhu bekerja: -10 to +60℃.
  • Relative humidity: 95% non-condensing.


  • Style number: AW-CBL-2166-A.
  • Diameter: 150*61 mm.
  • Work voltage: 20 kepada 28 VDC.
  • Work current: maximum 60 mA.
  • Volume: lebih daripada 68 dB.
  • Berat: 900 gram.


  • Model: AW-GRS2158.
  • Operation volt: DC or AC 24 volt, non-polarized.
  • Working current: less than 70mA under 24 VDC.
  • Flash time: 1.2 kepada 1.8 saat.
  • Matching panel: AW-GEC2169 gas fire control panel.


  • Model: AW-GD210 AND AW-GD202.
  • Dimensi:100*100*98 mm.
  • Function: start and abort.

All above mentioned components can form a completely fire alarm and detection systems, and then work together with sistem aerosol.

Reference standards: ISO 7240-1:2014(en)

  • This fire alarm system is special designed for gas type suppression generators, termasuk: fm200, novec 1230, aerosol, dry chemical, foam and water mist systems.
  • Each component has specific parameters and specifications, and the components are compatible and cooperate with each other.
  • All components must be connected to the controller, which serves as the central processing unit.
  • All components are with small dimension, able to save installation space as much as possible.
  • Highly integrated system with high tactile sensitivity.
  • The detection components cooperate with each other and do not interfere with each other.
  • The system has a 30 second delay function. Once a fire is detected, it can delay for 30 saat, during which people can quickly escape.

It can be applied in places where gas fire extinguishing systems can be installed, seperti:

  • Bilik komputer.
  • bilik pemprosesan data.
  • high-rise buildings.
  • Historical archives.
  • Closed parking lot.
  • Hotel dan restoran.
  • Power generator room.
  • Genset room.
  • Hazardous Product Room.
  • Turbin angin.
  • Bilik enjin kenderaan.
  • Braking zone.
  • Power supply room.
  • Meeting room.
  • Cupboard.
  • Backup generator room.
  • Hydraulic system room.

Each unit of the fire alarm systems has its unique advantages and characteristics, For more detailed information, please contact the supplier to request a PDF format file.

Usually, an aerosol fire extinguishing system project also requires a complete fire alarm and detection system.

Jiangxi Aware Fire Technology Co.,Ltd can provide one-stop service, for the installation and system debugging of fire suppression and fire alarm systems.

Sistem Penggera Kebakaran untuk Aerosol

borang pertanyaan ( kami akan menghubungi anda secepat mungkin )


3 + 7 = ?

Mungkin anda suka juga