Thermal cord type of aerosol fire suppression systems use “thermal cord” as fire detecting and sensing elements to trigger the fire extinguishing equipment, it can be applied in a wide range of industries and especially good to install in a place where weight and space saving is important factor.
Specifications of thermal cord type aerosol mainly as below described:
- Trigger type: Thermal sensing without electrical power, automatic sensing and start-up the device, with functions of fire detection, fire sensing and fire suppression.
- Aerosol extinguishing agent quality: 30 grams, 60 grams, 100 grams, 150 grams, 200 grams, 250 grams, 500 grams, 750 grams, 1000 grams, 1500 grams, 2000 grams, 2500 grams, 3000 grams.
- Aerosol extinguishing agent concentration: 100 gram each cubic meters.
- Protective volume: 0.3 m³, 0.6 m³, 1.0 m³, 1.5 m³, 2 m³, 2.5 m³, 5 m³, 7.5 m³, 10.0 m³, 15.0 m³, 20.0 m³, 25.0 m³, 30.0 m³.
- People’s safety distance: keep far away more than 1.5 meters distance.
- Safety distance in fire extinguishing: in 0.3 meter.
- Response time: no more than 30 seconds.
- Dimension of product: Variety dimensions, details please refer to our “technical data sheet”.
- Weight of product: variety weight, details please refer to our “technical data sheet”.
- Life service time of the product: more than 10 years.
- Thermal cord material: Nitrate and thermal sensing cable.
- Thermal cord sensing rated temperature: 175 or 300 degree Celsius.
- Fire Extinguishing classification and mode: Class A, Class B, Class C, Class E and even Class F.
- Nozzle temperature in the bottom after discharging: less than 200°C in about 5 millimeter distance form the nozzle.
- Cylinder temperature after compound releasing: less than 100 degree Celsius.
- Container main material: SUS 304.
- Environmentally temperature: between under 40 degree Celsius and above 70 degree Celsius.
- Operating voltage: no need voltage, it is automatic.
- Minimum trigger current: more than 250 milliamps per 5 milliseconds.
- Maximum safe current: less than 150 milliamps per 5 minutes.
- Operating relative humidity: less than 95%.
- Installation tools: by using of bracket or magnetic with glues 3M.
- Multiple device wire connection mode: series connection.