Do all for safety, for a safe world!
Tel:+86-0790-6000119 | E-mail: info@aerosolfire.com
EnglishAfrikaansالعربيةবাংলাDanskSuomiFrançaisDeutschעבריתMagyarBahasa IndonesiaItaliano한국어Bahasa MelayuPortuguêsРусскийEspañolTürkçeاردوTiếng Việt

Blog

» Blog

One Article for You to Read About Condensed Aerosol Compounds

March 23, 2025

Aerosol compounds are the most important chemicals used to make aerosol fire extinguishing devices. People understand aerosol generators better, but they don’t know much about aerosol extinguishing agents.

In this article, let’s elaborate on aerosol fire extinguishing agents so that you can learn more about them.

Condensed Aerosol Compound

Concept of Aerosol Compounds

Aerosol compounds are a mixture of several chemical substances. The main substances include potassium nitrate, strontium nitrate, dicyandiamide, phenolic resins, sodium oxalate, and potassium picrate.

The substance it emits contains large quantities of extinguishing gases such as N2, CO2, and water vapour, as well as solid particles such as oxides of potassium and strontium.

These substances are mixed together in order to produce aerosol gases capable of extinguishing fires through redox reactions, and this smoke-type gas can quickly extinguish fires in enclosed spaces.

The aerosol mixture (aerosol compound) is the most important part of the aerosol fire extinguishing device, and all the other accessories work with it.

Types

There are two main types of aerosol compounds, K-type aerosols and S-type aerosols.

The main difference between them is the composition of strontium nitrate and potassium nitrate. S-type aerosols contain 40% to 60% of Strontium nitrate, whereas K-type aerosols do not contain strontium nitrate but only contain 40% to 60% of potassium nitrate instead.

In addition, S-type aerosols are more environmentally friendly, while K-type aerosols are more efficient at extinguishing fires.

Till now, there are more companies producing K-type aerosols and fewer companies producing S-type aerosols.

Raw Materials

Raw materials for the production and manufacture of aerosol fire extinguishing agents include the following substances:

  • Potassium nitrate (one of the oxidising agents).
  • Strontium nitrate (one of the oxidising agents).
  • Potassium picrate.
  • Sodium oxalate.
  • Stearic acid.
  • Phenolic resin.
  • Lubricating oil.
  • Dicyandiamide.
  • Ammonium nitrate.
  • Epoxy resin.
  • Hexamine (CH2)6N4.
  • Guanidine nitrate.
  • Potassium bicarbonate etc.

Except for the composition of potassium nitrate and strontium nitrate, the composition of the other substances varies from manufacturer to manufacturer.

Different aerosol fire extinguishing agents have different extinguishing efficiencies, which require buyers to be good at identifying and conducting experimental tests.

Our aerosol fire extinguishing agent originates from Russia and was improved in co-operation with famous universities in China, and has been certified by domestic and foreign authorities. It is a regular high-efficiency fire extinguishing agent.

Production

The production of aerosol compounds is a tedious process because it involves the procurement of a large number of chemical raw materials. Its basic steps are as follows:

  • Step One, Core technical staff list the raw materials to be purchased, and the purchasing department performs specific purchasing tasks.
  • Step Two, Once the raw materials are purchased, the production department carries out the production tasks, and the batchers (fire extinguishing agent manufacturing employees) need to mix the different chemicals according to a certain ratio, mixing the chemical raw materials together to form a paste (or sludge) aerosol object.
  • Step Three, Aerosols need to be manufactured into different sizes, then the kneaded aerosol fire extinguishing agent needs to be weighed and divided into different weights.
  • Step Four, Paste aerosols are die-cast using moulds and aerosol-forming machines. Make it the size and weight you want.
  • Step Five, Use a specialised dryer to dry the extinguishing agent; you can also dry it in the sun (If time permits).
  • Finally, the aerosol fire extinguishing agent is put into the inner cylinder and assembled with other accessories to form the finished product.

There are precautions to be taken in the manufacturing process, which we describe in a later section.

How Aerosol Compounds Work

Aerosol compounds use a combination of physical and chemical principles to extinguish fires.

  • Chemical principle. Aerosol combustion produces tiny white smoke-like particles of gas that interrupt the combustion process by blocking the combustion reaction chain.
  • Physical principles. Aerosol fire extinguishing agent sprayed into the protected space can absorb heat, thus greatly reducing the temperature of the protected area and blocking combustion.

Condensed aerosols are based on chemical properties to extinguish fires. Aerosol chemicals undergo a rapid chemical reaction when they come into contact with flames. Free radicals in the flame combine with combustion substances to form stable compounds, thus cutting off the combustion chain of the flame, so that the flame is quickly extinguished.

Compound Fire Extinguishing Formula

The fire extinguishing capacity of an aerosol fire extinguishing device is determined by the size (volume) of the extinguishing space, the design density of the extinguishing agent to extinguish the fire, and the volume correction factor.

The formula is: W=C*V*Kv. W is the design dosage of aerosol fire extinguishing agent (KG); C is the fire fighting design density (KG/m3); V is the volume of the protection zone (volume of the protected space); and Kv is the volume correction factor.

You can also refer to this article – Minisol Design for more information.

Applications

Aerosol fire extinguishing agents and devices are used in a wide range of applications, which are listed below for different extinguishing spaces.

  • Micro-space fire suppression. The application fields include electric meter box, lithium battery pack, power exchange cabinet, charging pile, e-bikes, electric scooters, and electric motorcycles.
  • Small-space firefighting. the applications fields including electrical cabinets, control panels, energy storage cabinets, vehicle engine compartments, wind turbine nacelles, etc.
  • Large-scale space firefighting. The application fields include energy storage containers, computer rooms, power distribution rooms, power generator rooms, diesel generator rooms, data centers, server rooms, etc.

In all, it can be used in most places. Except for the following places:

  • A substance that can be oxidised without oxygen.
  • Active metallic substances.
  • Substances capable of spontaneous combustion, e.g., phosphorus.
  • Deep fires in solids.
  • Dense places (crowded places), such as railway stations, bus stations, etc.

Initiation (Activation) of Aerosol Compounds

There are 4 reliable ways to activate aerosol fire extinguishers, and they are: Electrical Activation, Thermo Glass Bulb Activation, Thermal Cord Activation, and Linear Detector Cable Activation.

  • Electrical activation. This method uses an input of 3 to 24 volts (or 500 milliamps to 1 amp of current) to activate the fire extinguishing device. As soon as power is on, the extinguishing agent is immediately released to extinguish the fire.
  • Thermo glass bulb. It uses the blasting principle and mechanical principle to activate the fire extinguishing device. When the ambient temperature reaches the bursting temperature of the glass ball, the glass ball will burst, thus stimulating the mechanical movement to produce an instantaneous electric current to start the fire extinguishing agent.
  • Thermal Cord activation. This method is also a temperature start and is an automatic start. This thermal wire can detect fire and can burn. When the ambient temperature reaches the rated temperature (175°C) or when it encounters an open flame, it can activate the fire extinguishing device.
  • Linear detector cable activation. It is a temperature auto-start, just like a thermal wire start. However, it differs in that it activates the fire extinguishing device by the principle of short-circuit generated by the melting of the outer protective layer in the presence of heat.

There are advantages and disadvantages to all activation methods, and the decision on which activation method to use needs to be made based on the specific application scenario.

Below is a thermal cord activation of the video:

Features

Aerosol fire suppression agent is an efficient and environmentally friendly fire extinguishing technology with the following main features:

  • Highly efficient fire suppression. It can extinguish fires in seconds to tens of seconds with a quick response.
  • Unique fire extinguishing mechanism. It uses a combination of chemical inhibition and physical cooling, through chain reaction and absorption of heat, etc., to achieve the purpose of successful fire extinguishing.
  • The utility is extensive. It can be used for A, B, C, E, and  F type fires, and also for special types of fires such as lithium batteries. In addition, it is particularly suitable for enclosed and semi-enclosed spaces.
  • Environmentally friendly. It does not destroy the ozone layer. it does not have a greenhouse effect. it has little residue. it is non-conductive, and it does not affect precision instruments.
  • Safety. Firstly, the gases released are mainly nitrogen, carbon dioxide, and water vapour, which are harmless to the human body; secondly, the fire extinguishing device does not need to be stored under high pressure, which is safe and less likely to leak.
  • Easy to install and maintain. It is simple to install and does not take up a lot of space; it does not need to be recharged regularly, is easy to maintain, and has a service life of more than 10 years.
  • Economy. It is more economical and practical because of its various costs, including low maintenance costs.

The above properties of aerosol make it irreplaceable in some fire situations. so when we choose it, we can know its characteristics first.

Aerosol Compound Material Safety

Aerosol fire extinguishing agent usually consists of the oxidising agent, a reducing agent, a binder, and additives; the main components include potassium nitrate, metal powder, binder, coolant, etc. These components are stable at room temperature but will decompose and release fire-extinguishing gases at high temperatures. Therefore, it is necessary to pay attention to the influence of a high-temperature environment on the aerosol fire extinguishing agent.

Aerosol fire extinguishing agent will generate high temperature when releasing fire extinguishing gas through combustion reaction. which may cause injury to personnel, so please do not approach or touch the shell when the gas is released.

The gases released, mainly nitrogen, carbon dioxide, and water vapour, are usually non-toxic but may reduce oxygen concentration in confined spaces, affecting the safety of personnel.

Aerosol fire extinguishing agents are environmentally friendly as they do not damage the ozone layer and do not produce greenhouse gases.

However, they may cause skin or respiratory tract irritation, and direct contact should be avoided.

Extinguishing Efficiency

Aerosol compounds are highly efficient in extinguishing fires, as demonstrated below:

  • Quickly extinguish fires. It can extinguish fires in seconds to tens of seconds and is particularly suitable for initial fires.
  • Low fire extinguishing concentrations. The extinguishing concentration (amount of extinguishing agent required per unit volume) of aerosol compounds is low, usually 50-100g/m³, much lower than other gaseous extinguishing agents.
  • Effective for Class A (solid), Class B (liquid), Class C (gas), and electrical fires, especially suitable for enclosed or semi-enclosed spaces.
  • Effective in extinguishing electrical fires and fires in enclosed areas.

Assembly of aerosol fire extinguishing agents

The assembly procedure for aerosol fire extinguishing agents consists of the following major steps:

  • You use specialised die-casting machines to die-cast the extinguishing agent to a specific size and weight.
  • You dry the extinguishing agent in a drying machine or leave it in the sun.
  • Fill the reaction chamber of the fire extinguishing device (inner cylinder of the fire extinguishing device) with the pressed aerosol fire extinguishing agent.
  • Installation of other auxiliary components such as ignition devices, cooling devices, wires, and cables.
  • Smoothly place the inner cylinder into the outer cylinder and line the inner and outer cylinders with insulation foam.
  • You encapsulate the fire extinguishing agent as well as the fire extinguishing device with a special sealing machine to ensure its hermeticity and safety.

Through the above steps, the aerosol fire suppression agent is fully assembled, and the aerosol generator is completed.

Precautions for Aerosol Fire Extinguishing Agents(Aerosol Compound)

To ensure their safety and effectiveness, Aerosol fire extinguishing agents require attention to the following matters during use, storage, and transport:

1. Precautions for Use/Application

  • Applicable fire types. It is well suited to Class A, B, C, E, and F fires, with limited effect on Class D fires and chemical fires.
  • Do not use it in crowded places, as the inhalation of aerosol particles by people over a long period can affect the human body.
  • Product discharging distance. Maintain a safe distance (typically 1-2 meters) to avoid impact on personnel when the aerosol acts.

2. Storage Precautions for Aerosol Compounds

  • Storage Environment. Store aerosol compounds in a dry, well-ventilated environment away from heat, humidity, or direct sunlight. The storage temperature range is usually between -40°C and 95°C.
  • Keep away from fire sources. Storage areas should be kept away from open flames, heat sources, or flammable materials to prevent accidental ignition.
  • Regularly check the appearance and expiry date of fire extinguishing devices to ensure they are not damaged or expired.
  • Segregated storage. Store it separately from other chemicals to avoid chemical reactions.

3. Transport Precautions

  • Packaging Requirements. Use packaging materials that comply with standards to ensure that the extinguishing agent (and the extinguishing device) is not subjected to impact or compression during transport.
  • Transport Conditions. Avoid severe vibration, high temperature, or a humid environment.
  • Compliant transport. Compliance with local and international transport regulations, in particular requirements for the transport of dangerous goods.

Safety Precautions

  • If an aerosol extinguishes an accidental spray, ventilate immediately and move away.
  • If a person’s skin or eyes accidentally come into contact with the extinguishing agent(aerosol compound), flush with plenty of water and seek medical attention.

Purchase of condensed aerosol fire extinguishing agents

You should look for professional and regular manufacturers to buy condensed aerosol compounds and fire extinguishing devices. We are a regular manufacturer of aerosol fire extinguishing agents and fire extinguishing devices. We have more than 20 years of experience in manufacturing fire extinguishing agents and fire extinguishing devices. Please feel free to buy from us.

Automatic fire suppression system for wind turbine

CATEGORY AND TAGS:
Blog

Maybe you like also

  • Categories