The 8G aerosol fire system product is a stand-alone automatic fire extinguisher that contains 8 grams of condensed aerosol compound inside.
This product can be used for the fire protection of solar photovoltaic inverters. Because 8 grams of extinguishing agent can cover an enclosed space of 0.08 cubic metres, and the volume of a PV inverter is basically 0.08 cubic metres or less.

As you know, PV inverters contain a lot of electrical components, including circuit boards, coils of copper wire, capacitors, transformers, and so on. So PV inverter is easy to heat up and prone to thermal runaway.
Perhaps you are also looking for a small fire extinguishing device for PV inverters, but are struggling to find the right product with the perfect solution.
Now we have a small 8g aerosol extinguishing system product that is great for PV inverter fire prevention and control because:
- Small in size, it has a diameter of only 40 mm and a height of only 20 mm, which is just enough to be mounted in the limited space of a PV inverter.
- The product is fully self-starting. Not only is it self-starting, but it is capable of automatically detecting fires because its detection components are thermal wires.
- Extremely efficient in extinguishing fires. the enclosure contains 8 grams of aerosol extinguishing agent and can extinguish fires in enclosed spaces of 0.08 cubic metres.
By describing the 3 advantages above, if you understand what a PV inverter consists of, I think you should already know that our 8g fire extinguisher can be a solution for PV inverters.

Basic Parameters of 8G Photovoltaic Inverters Style Aerosol Fire System
Here are the basic parameters of this 8g compact fire extinguishing equipment:
| Product Name | Photovoltaic Inverters Aerosol Fire System. |
| Model Number | QRR0.008G/S/SA. |
| Quality | 8 Grams. |
| Content | Condensed Aerosol Dry Powder. |
| Discharging Time | Less than 10 seconds. |
| Product Dimension | φ40mm*20mm(H). |
| Activation Condition | Thermal Cord (Automatic). |
| Cylinder Material | Carbon Steel with Red Painting. |
| Purpose | Protect the PV components and facilities in solar power systems. |
| Ambient Temperature | -50℃ to +95℃. |
If you would like to know more about our products, please do not hesitate to contact our sales or service staff, who will send you the product specification or the specific technical data sheet.
This product is easy to install. It comes with 3M brand double-sided tape on the bottom. When you install it, just stick it on the side wall of the PV inverter or any other free place.
Note: If there are some inverters that are larger and will have a volume of more than 0.08 cubic metres, then we will recommend a larger model to you accordingly.