The DIN rail aerosol fire extinguisher is the most cost-effective tool for protecting electrical cabinets and control panels. Because it can be integrated directly into electrical installations.
It provides automatic fire protection in cabinets where electrical fires are likely to occur.
It achieves a fundamental shift from traditional fire suppression methods. This makes electrical cabinet fire suppression both economical and affordable.
Unlike other larger aerosol generators and gaseous fire extinguishing systems, DIN-Rail aerosol extinguishers snap directly onto international standard rails (35mm) and are arranged in line with electrical components such as relays, circuit breakers, and earth leakage protectors.
This layout makes it possible to detect fires in a timely manner and initiate fire suppression in the shortest possible time, reducing the frequency of fires.
For facility managers, electrical engineers, and manufacturers of electrical equipment, the aerosol-based DIN rail-mounted fire extinguishers are a valuable aid in their work.

DIN rail refers to the standardized metal mounting rails defined by the international standard IEC 60715, which are commonly used for fixing circuit breakers and their various components in electrical distribution cabinets. The most widely used specification is the international standardized rail with a width of 35 mm.
Aerosol fire extinguishers are supplied with slide clips specifically designed for DIN rail mounting, which snap securely onto the rail for quick installation and positional adjustment without the need for drilling.
Aerosol fire extinguishers are solid powder fire extinguishing substances with strontium nitrate and potassium nitrate oxidizers in the inner cylinder.
This extinguishing medium operates through the principle of redox reaction to eliminate the distribution cabinet and other closed spaces of the initial fire.
Aerosol fire extinguisher works through the “fire against fire” principle to achieve the purpose of fire.
Condensed aerosol fire suppression technology utilizes a solid compound (strontium nitrate or potassium nitrate) stored in a compact generator. Activation of the extinguishing agent results in a redox reaction that produces ultra-fine aerosol particles (typically less than 10 microns) suspended in the air. These fine free-radical particles fill the protected space and quickly extinguish the flame.
The fire extinguisher housing with rails has 2 tiny spouts on the left and right ends.
The activated aerosol fire extinguishing agent is rapidly ejected through the nozzles to extinguish the flames in the electrical cabinet.
Combination of Customized Housings and Aerosol Components
When the aerosol extinguishing agents are combined with a customised rail-mounted enclosure, a complete rail-mounted aerosol fire extinguisher is formed.
Typical rail-mounted extinguishers are 40-120mm wide and 50-100mm high, and can be installed side by side with existing electrical equipment in crowded panels.
The installation is located on the internal rails of the electrical cabinet.
It is different in nature from other extinguishing media. Aerosol fire extinguishing technology, which produces a redox reaction that cuts off the free radicals of combustion and can extinguish flames in confined spaces with less extinguishing agent.
While the other water-based fire extinguishing agents, foam fire extinguishing agent, carbon dioxide fire extinguishing agent, dry powder fire extinguishing compounds, are only in accordance with the traditional way to extinguish the fire, the amount of fire extinguishing agent required is more.
The activation element of this fire extinguisher is a military product – thermal wire. It is a temperature detection and activation device with exquisite workmanship.
The thermal wire is rated at 175 °C ± 10 °C (347°F ± 50°F). When the ambient temperature in the switchgear cabinet reaches the rated temperature, or when the thermal wire encounters an open flame, it will quickly ignite and activate the aerosol agent contained in the extinguisher’s enclosure, which will be released to extinguish the fire within 2-3 seconds.
In the event of a power failure, the product detects the fire and extinguishes it automatically without human intervention.
The product has good environmental characteristics as follows:
However, the extinguishing agent has a slight odour, which is a normal property of extinguishing agents, and its odour does not affect the atmosphere.
The life span of the electrical components on the slide (such as the surge protection device) can reach more than 10 years, and our DIN rail extinguishers have a life cycle of between 10 and 15 years; they all have a very long service life.
Therefore, our fire extinguishers are well-suited for power distribution facilities.
In addition, this DIN rail aerosol fire extinguisher does not require annual inspection or maintenance.
With a length of 80cm, a width of just 20mm, and a height of 70mm, this product is the same size as a 1P circuit breaker. Side-by-side and compatible with products from electrical companies and electrical component companies.
It can be mounted on the same international standard rails as the circuit breaker without taking up more space in the distribution cabinet.
Once our DIN rail fire extinguisher is activated, the aerosol compound (10g,12g, etc.) discharges within 3 seconds, flooding the small confined protected volume. The Ultra-fine aerosol particles (0.01-10 microns) reach all corners of the electrical enclosure, suppressing fire before it spreads. Furthermore, the aerosol agent remains suspended for minutes, preventing re-ignition. till completely suppress the power distribution cabinet fire.
Installation of the product does not rely on specialised tools or professional training.
This is because the unit can be quickly snap-fastened to a standard 35 mm DIN rail. The thermal cable (standard length 10 cm, customisable up to 100 cm) supports a flexible arrangement for optimal thermal detection.
In addition to this, you can optionally use 3M double-sided tape to provide an alternative mounting solution for non-DIN rail applications.
The installation of this product is simple, efficient, and easy.
This product is designed in a 1:1 or 1:2 scale according to the mould of the circuit breaker, simulating the installation scenario of the circuit breaker (the guide rail of the electrical cabinet).
The shell of the product is high-temperature-resistant PVC material, with a cooling ball to reduce the temperature of the shell of the product when spraying. The product will not produce an open flame after spraying. When the product is started, it can quickly and efficiently extinguish the incipient fire in the electrical cabinet.
The product has no residual spraying and does not carry any substances that could harm the electrical circuits of the switchboard.
The materials and technology of this product have been developed and designed specifically for the switchboard environment. Specific parameters are listed in the following:
| Product Specification | Value |
| Model | QRR0.01G/S/SA-EC |
| Extinguishing Compound | Condensed Aerosol Powder |
| Aerosol Dosage | 10g, 12g, and more. |
| Protected Volume | Up to 0.1m³ (Confined spaces) |
| Activation Mode | Thermal Cord (Do not rely on the power supply) |
| Activation Temperature | 175 °C ± 10 °C (347°F ± 50°F) |
| Certification | CE, Rohs, and Test Report |
| Discharge Duration | ≤3 seconds |
| Mounting Options | 35mm DIN-rail Mount and/or 3M double-sided tape |
| Product Width | 18mm (1P footprint) |
| Cylinder Material | High-temperature resistant plastic |
| Color of the Product | Red |
| Thermal Cord Settings | Two sides (left and right) |
| Thermal Cord Length | Standard: 10 cm. Customizable: 10-100cm per cord wire. |
| Operating Temperature Range | -50°C to +95°C (-58°F to +203°F) |
| Relative Humidity | ≤95%RH (non-condensing) |
| Life Span | 10 to 15 Years |
| Maintenance Requirements | Low Maintenance, Maintenance Free |
| Environmental Properties | Non-toxic, non-corrosive, ODP=0, GWP=0, ALT is low. |
| Electrical Conductivity | Non-conductive (safe for energized equipment) |

A variety of different fire extinguishers perform differently in switchboard spaces, so let’s explain their different performance in switchboard protection.
ABC dry powder extinguishers use ammonium phosphate powder to smother flames by forming a barrier between fuel and oxygen and interrupting the chemical reaction.
It is the most common type of fire extinguisher and is mainly used in high-rise buildings, supermarkets, and shops for Class A (combustible), Class B (flammable liquids), and Class C (electrical) fires.
However, its fine powder residue can corrode electronic equipment and is difficult to clean.
Carbon dioxide extinguishers extinguish fires by means of compressed carbon dioxide gas stored in pressurised containers, which are suitable for Class B and C fires and are limited to Class A fires.
Carbon dioxide presents a risk of asphyxiation in confined spaces.
Carbon dioxide extinguishers are large and require manual operation to extinguish fires; they are not suitable for direct installation inside distribution cabinets.
The basic extinguishing principle of water-based fire extinguishers (including water mist and foam extinguishers) is to cool burning material by absorbing heat. To achieve the purpose of extinguishing the fire.
This extinguisher is highly effective on Class A fires and is cost-effective and environmentally friendly.
However, its main drawbacks include: it is not suitable for Class E electrical fires or Class C flammable liquid fires, it can cause water damage to equipment after spraying, and there is a risk of freezing in cold environments.
Its larger size and heavier weight also make it unsuitable for application in a switchboard environment.
Heptafluoropropane fire extinguishers (FM200 for short) and perfluoroethylene ketone fire extinguishers (FK5-1-12 for Short) have the same attributes as carbon dioxide fire extinguishers and are both gaseous fire extinguisher types.
Their main feature is that they need to be pressurized, mainly through physical cooling, to achieve the role of fire extinguishing.
Moreover, they need larger containers as loads, which are not suitable for the installation space of the power distribution cabinet.
DIN rail fire extinguishers are one type of aerosol fire extinguisher, the functions and characteristics of which are described in detail in the section above.
It is small in size and has been specially developed for the protection of switchboards and is particularly suitable for use in electrical cabinets and other applications.
Except for aerosol fire extinguishers, other types of fire extinguishers we categorize as traditional fire extinguishers. Below, we will compare traditional fire extinguishers with aerosol fire extinguishers.
Aerosol fire extinguishers have a better cost than traditional fire extinguishers, and the table below lists the differences between them:
| COST INDICATORS | AEROSOL FIRE GENERATOR | TRADITIONAL EXTINGUISHERS |
|---|---|---|
| Basic Procurement | US Dollars $1-$50 Per Unit | US Dollars $10-$500 Per Unit |
| Annual Maintenance | $0-$100 (o need for annual maintenance) | $100-$500(Inspection, Pressure check, Documentation Record) |
| Installation and Commissioning Costs | Minimal ($0-$50 labor) | $50-$1000 Difference |
| Potential Risk of Damage | Minimal (electronics-safe) | High (powder cleanup: $50-$500+; water damage: $500-$5000+) |
| Fire Extinguishing Replacement Cost | Zero (Disposable Product, Replace New After Use) | $10-$200 every 2-3 years (hydrostatic testing) |
| Downtime Cost | Zero | Medium cost (projected $10- $100 cost) |
| Cost to Replace Fire Extinguishers | 10 to 15 Years Replace New One (Low) | 3 to 5 Years Replace New One (High) |
Aerosols and conventional fire extinguishers have different applicability for different areas. We use the table below to list their different application points:
| APPLICATION SITE (SCENARIO) | AEROSOL EXTINGUISHER( INCLUDE DIN RAIL TYPE) | TRADITIONAL EXTINGUISHER | OUR RECOMMENDATION |
|---|---|---|---|
| Lithium Battery Pack | Good (Automatic Thermal Cord and Electrical) | Poor (Size to Large) | Aerosol (LiSol Type) |
| Energy Storage Cabinet | Good (Automatic Thermal Cord and Electric Start) | Good (Depends on Cabinet Design) | Aerosol (LiSol Type) |
| Electrical Cabinet (Control Panel) | Excellent (No residue, No corrosive) | Restrictive (Large size, Residue, Corrosive) | Aerosol (Din Rail Type Aerosol) |
| Auto Vehicles | Excellent (Compact and Space Saving) | Poor ( Large Size, Residue, Corrosive) | Aerosol (MiniSol Generator) |
| E-Scooters | Good (Small Size, Friendly to Electronics) | Poor (Size too large) | Aerosol (Lisol Aerosol) |
| Electric Forklift | Good (Small Size, Friendly to Electric Forlkif Engine) | Restrictive (Large size, Residue) | Aerosol (Lisol Aerosol) |
| Sever Room and Data Centers | Good (electronics-safe and automated Activation) | Good (CO2: residue-free; FM200 and FK5112: Clean) | CO2, FK5112, Or FM200 |
| Power Distribution Box/Meter Box | Excellent (DIN Rail Aerosol Fire Extinguisher) | Poor (Limited Space) | Aerosol (DIN Rail Type) |
| Office Space and Public Places | Poor (Aerosols should not normally be used in manned areas) | Good ( Water-based, Dry Powder, Foam) | Water-based, Dry Powder, Foam |
| Kitchen Hood | Limited (People keep far away when aerosol activated) | Excellent ( Dry Powder) | Dry Powder |
| Factory and Warehouse | Limited (Aerosol can not be applied in confined factory and warehouses) | Good (Dry Power and Foam can be applied in open areasin factory and warehouse | Dry Powder and Foam |
| Marine/Vessel/Boat Engine | Excellent (corrosion-resistant, automated) | Excellent(Clean CO2, FM200, FK5121) | Al of them are okay |
| Transformer | Limited (Space limites) | Excellent (Clean Water-mist System) | Water-mist |
| Solar Panel | Excellent (Small, Compact for Solar Panel Installation) | Poor ( Size too much large) | Aerosol (DIN Rail, Minisol, Or Lisol) |
Dry Powder, Carbon Dioxide, Foam, Water-based, and FM200 (FK5112) gaseous fire extinguishers are traditional fire-fighting tools.
We compare them with aerosol extinguishers and use data to analyse the differences in performance parameters between them.
Please look at the following data for comparison:
| Performance Items/Indicators | Dry Powder | Carbon Dioxide | Foam | Water-Based (Water-mist) | FM200 (FK5112) | Aerosol |
|---|---|---|---|---|---|---|
| Fire Class | Class A, B, C | Class B, C | Class A, B, C | Class A only (mist: A, B, C) | Class A, B, C, E, F | Class A, B, C, D, E, F |
| Fire Extinguishing Speed | 10 to 30 Seconds | 10 to 30 Seconds | 10 to 20 Seconds | 10 to 30 Seconds | 2-5 Seconds | 2 to 5 Seconds |
| Residue After Fire Extinguishing | Many (Dirty, hard to Clean up) | None | Some (Dirty, A little hard to clean up) | None | None | Little |
| Corrosiveness to Electrical Equipment | Medium Corrosion | None | Strong | Strong | None | None |
| Response Time | Manual: operator-dependent; Auto: 2-5 seconds | Manual: operator-dependent; Auto: 5-10 seconds | Manual: operator-dependent; Auto: 3-5 seconds | Manual: operator-dependent; Auto: 3-5 seconds | Activated in 2-3 seconds | Activated in 1-2 seconds |
| Operational Safety Factor | With pressure, there is some danger | With pressure, there is some danger | With pressure, there is some danger | With pressure, there is some danger | No danger, No risk | No danger, No risk |
| Activation Method | Manual | Manual | Manual | Manual | Automatic | Automatic |
| Container Material Requirements | Welding or sealing metals,Plastic | Welding or sealing metals | Welding or sealing metals | Welding or sealing metals | Welding or sealing metals | Carbon Steel, 304 Stainless Steel or Plastic |
| Environmental Impact | Low environmental concern | Destruction of the atmospheric ozone layer | Green | Green | FM200 has some depletion of the atmospheric ozone layer | Green (Zero ODP and GWP, Low ALT) |
From the performance comparison in the table above, we can see that aerosols and gas extinguishers (FM200/FK5112) have unique advantages, where aerosols are safer to install.
The DIN rail automatic aerosol fire extinguisher can be installed inside the enclosures and accessories as shown in the following table form.
We list the detailed application fields for the electrical facilities (power supply components):
| Applications One | Applications Two | Applications Three | Applications Four | Applications Five |
|---|---|---|---|---|
| DC MCB | MCCB | RCCB | MC4 | DC Contactor |
| DC Isolator Switch | ATS | FUSE | Busbar Insulator | UKK |
| Cab Lug | MCB Busbar Connector | Terminal Block | Timer Switch | Time Delay |
| Switch Position Indicator | Air Circuit Breaker | Modular Contactor | AC Contactor | Thermal Overload Relay |
| Overvoltage and Undervoltage Protector | Change-over swtich | Modular Contactor | Metal Clad Switch | Solar Connector |
| AC Distribution Box | DC Conbiner Box | AC Switch Disconnector | AC Load Disconnector | AC SPD |
| DIN Rail Socket | Power Track Socket | UK Switch and Socket | Foot Switch | Junction Box |
The DIN rail aerosol fire extinguisher is the best way to suppress the electrical cabinet fire.