In the field of fire safety, energy storage represents a new trend. To meet the safety requirements for energy storage, we have successfully developed a 300g ESS aerosol canister fire suppression system.
This product is forged from high-grade, internationally recognised 304 stainless steel. The top, bottom, and circular casing are all made from 5-millimetre-thick 304 stainless steel sheet.
Key Features of This 300G ESS Aerosol Canister Fire Suppression System
This product has the following key features:
Its start-up connector is a G12 aviation connector with an IP67 protection rating. The copper core acts as the primary current-carrying conductor.
According to our precise measurements, the product measures 76 millimetres in diameter and 200 millimetres in height (including the height of the aviation connector). It is finely crafted and has a smooth finish.
There are six circular holes, each 8 millimetres in diameter, at the base of the product. These holes serve to discharge the aerosol fire-extinguishing agent.
This fire-extinguishing device offers excellent resistance to corrosion and salt and alkali. You can install it in the switchboards of offshore wind turbines, outdoor energy storage containers, and other enclosed, unmanned locations subject to harsh environmental conditions.
The key oxidant of this product is Potassium Nitrate, takes up to 50%, sometimes we call it ” potassium fire extinguisher“.
You can install it in a standard enclosed distribution cabinet using European-style clamps and brackets. However, if you wish to install it on top of an energy storage container or on top of an energy storage cabinet, you will need specially customised brackets to enable it to be mounted horizontally against the inside of the cabinet ceiling or the inside of the container.
Basic Parameters of This 300G Energy Storage Potassium Fire Extinguisher Device
Product Name: Aerosol Canister Fire Suppression System.
Model: AW-QH-300E-ESS.
Dosage: 300﹢10 Grams.
Application: Energy storage system ESS, Battery Cabinet, Battery Containers etc.
Size: φ76*200 mm.
Device Weight: ≥3 kilograms.
Activation Mode: Electrical Activation.
Trigger Current: 500mA Transient current.
Trigger Voltage: 3 to 24 VDC.
Shell Materials: High-grade 304 stainless steel.
Extinguishing Holes Number: 6.
Extinguishing Time: more than 10 seconds.
Product Life-span: 10 Years.
Ambinet Temperature: -40℃ to +95℃.
Relative Humidity: 95% non-condensing.
Brand: Aware Fire, and OEM/ODM service available, Private label service available.
Compatibility: Fire Alarm systems, detection systems, control systems, in-vehicle systems, CAN bus systems, RS485 Interface, signal feedback systems, etc.
Frequently Asked Questions about Fire Extinguishers for Energy Storage Applications
QUESTION 1: Compared with the standard Minisol Aerosol, what is the key feature of this product? Answer: Its most notable feature is its considerable thickness, which enables it to be installed in extreme environments, such as saline-alkali soils and areas of high humidity.
QUESTION 2: Please tell me how to install it? Answer: We have specialised installation fittings, including clamps, screws, and mounting brackets. All you need to do is install it vertically or horizontally inside the energy storage cabinet.
QUESTION 3: Would it be feasible to install it in a 20-foot or 40-foot energy storage container?
In theory, it is possible. but require large quantity. Therefore, for energy storage containers, we recommend a higher-capacity aerosol generator: the 3000-gram Aerosol Generator.
All fire-extinguishing devices suitable for use in energy storage systems have undergone rigorous screening and testing.
It took our product managers a considerable amount of time to develop this 300-gram aerosol fire-extinguishing device, which is suitable for use in energy storage systems.
In short, this aerosol product for energy storage cabinets has the following distinctive specificity:
It has a diameter of just 76 centimetres and can be fitted horizontally on top of the energy storage cabinet, or on either the left or right side panel.
The product is 200 millimetres high and is suitable for energy storage cabinets and energy storage containers.
The top and bottom panels of this energy-storage aerosol canister are assembled using threaded knobs. Consequently, it offers excellent sealing performance. It achieves an IP67 rating for water and dust resistance.
The circular hole at the base of the product is made from a high-grade, easily meltable plastic film, which ensures both the product’s airtight seal and unobstructed release.
It is highly responsive, as it can be activated by a direct current of between 3 and 24 volts.
The product is extremely effective at extinguishing fires; based on a design concentration of 100 g/m³, it can cover a 3 cubic metre space within an energy storage cabinet.This product utilises a high-performance temperature-limiting fire-extinguishing agent that is resistant to both corrosion and saline and alkaline environments. It is suitable for outdoor energy storage facilities and external environments such as wind turbine nacelles at high altitudes.
Most importantly, this product has a service life of over 10 years and is maintenance-free.
If you would like to find out more about energy storage applications, please do not hesitate to contact us.
The 300-gram aerosol canister fire suppression device is primarily used in the following situations:
ESS Energy Storage Cabinet.
Large-scale battery-swapping cabinet.
Large parcel lockers.
Large power distribution board.
Switchgear.
Capacitor cabinet.
Electrical/Electric cabinet.
It is particularly suitable for energy storage systems, as it has been designed specifically for fire protection systems in energy storage facilities.