The sequential starter is also named “sequence starter” or “sequence actuator”, which is designed to divide the valve signal output by the fire control panel into four to delay the trigger of the fire suppression device one by one.
In short, a sequence initiator is an auxiliary device of a fire-extinguishing system, which is connected to a controller to activate the fire-extinguishing devices one by one.
There are 9 LED indicators on the sequential starter, Among them, the green color indicator is the power indicator, when power is on, this green indicator will light up.

In addition, each valve output has a red indicator and a yellow indicator, when the corresponding output circuit is activated, the red indicator light will light up; when a circle fails or faults, the yellow indicator will light up.
The product has 4 valves (valve 1, valve 2, valve 3, and valve 4), each valve can be connected to a maximum of 16 extinguishing devices, so the device can be connected to a maximum of 64 extinguishing devices.
Sequence initiators play a very important role in fire extinguishing systems, not only beautifying the installation but also enabling the activation of more fire extinguishing devices.

The following are the basic technical parameters of this sequential starter:
- Product Name: Sequence Starter or Sequential Starter.
- Model Number: AW-GD205.
- Dimension: 125*125*40 mm.
- Working Pressure: 24VDC to 48VDC.
- Working Current: ≤25 mA.
- EM Output Current: Maximum 2 Amp.
- Number of extinguisher connections: 0-16 pcs maximum (Minisol Aerosol)
- Product Material: SPCC with red paint.
- Working Temperature: -20 to +55℃.
- Relative Humidity: 95% non-condensing.
- IP Protection Class: IP20.
- Installation Location: On the ceiling, inside and outside the wall.
- Application: accessories of fire suppression device, such as aerosol fire extinguisher and ABC dry chemical, etc.
It works with fire alarm systems and fire suppression systems.
For more details, please read the operational manual of the Sequential Starter.
