Our pipework-free heavy equipment fire suppression device is a technological innovation, as most of the heavy equipment fire extinguishing systems in the world today require pipework for the delivery of the extinguishing agent.

Our aerosol fire extinguishers are a pipeless fire extinguishing system. You can easily install it on your heavy equipment.
For example, an excavator needs to be fitted with a fire suppression system. To install our pipework-free aerosol generator, you only need the following steps:
- As a first step, you can measure the dimensions of the engine compartment of the excavator (length, width, and height), then calculate how many grams of aerosol fire extinguishing agent you need to use according to the dimensions, and finally choose the right product type.
- As a second step, install our pipework-free heavy equipment fire suppression device on the engine and connect it to the battery power supply; also, install the start and alarm buttons in the driver’s cab.
With the above 2 steps, our product is installed, and you don’t need to do any complicated installation job.

Parameters of Pipework-Free Heavy Equipment Fire Suppression Device (Aerosol Generator)
Below are the main technical parameters of this product:
- Product Name: Pipework-Free Aerosol Fire Suppression Device.
- Purpose: Heavy equipment suppression.
- Model: Range from 250 grams to 1000 grams.
- Protective Range: from 2.5 cubic meters to 10 meters difference.
- Main Suppression Chemical Agent: Aerosol Potassium and Strontium 50% to 58%.
- Extinguishing Time: less than 30 seconds.
- Human-body Safety Distance: 3 meters.
- Trigger Mode: electric, electronic, electrical power supply, and thermal.
- Product Shell: 304 stainless steel.
- Installation Accessories: 304 SUS materials of Screws and Support.
- Lifetime: 10 years.
- Air Pollution Indicators: 0.
- Corrosivity: 0.
- Radiation Value: 0.
- Quantity of Residue After Spraying: little.
- Ambient Temperature: -50℃ to +95℃.
- Relative Humidity: 95% non-condensing.
- Standard: UL 2775, NFPA 2000, GA499.1- 2010.
This system requires more than 3 volts of power, so it needs to be powered by the batteries that come with the heavy-duty equipment.
In addition, the system requires an activation and alarm button, which is usually located in the driver’s cab to allow the driver/operator to extinguish the fire in the first instance.
Since the aerosol fire extinguishing agent is sprayed uniformly and fills the entire protective space, it is possible to spray the agent throughout the entire protective space in the same way as in other piping suppression systems.

There are many types of heavy-duty equipment, and a list of specific applications for this product is shown below:
- Wheel loaders (Machine).
- bulldozers (Earth-moving machine).
- Road Roller.
- Craine (i.e: Hoist).
- Concrete pumps.
- Paver.
- Mechanical digger.
- Crushing machine.
- Drilling machine.
- Harvester.
- Tractors.
- Forklift trucks.
- Harbour Cranes.
- Wind turbine.
- Generating set.
- Heavy-duty trucks.
- Railway engineering vehicle.
- Tunnel boring machine.
- Military equipment (e.g., tanks, engineering armoured vehicles).
These are just a few of the applications listed.
It can also be used in some special applications, Please contact us to discuss further.