The k-type aerosol compound uses the fire-extinguishing agent of potassium as the main oxidant, while S-type aerosol uses the chemical strontium nitrate as the main oxidant.
In the ratio of aerosol agents, for K-type aerosols, the chemical potassium nitrate accounts for 70-80% of the proportion and plays a major role in extinguishing fires; while for S-type aerosols, the chemical strontium nitrate accounts for over 50% of the proportion, potassium nitrate only accounts for 10-20% proportion, the strontium nitrate plays a major role in eliminating fires.
So the main difference between K-type and S-type aerosol fire extinguishing systems lies in the differences in oxidants; The main oxidants of K-type are potassium nitrate and its mixture, while the main oxidants of S-type are strontium nitrate and its mixture.
The fire extinguishing efficiency and environmental performance of K-type and S-type aerosols are different, which are determined by their respective chemical properties.
Hereby below let us specifically compare the characteristics of these two different chemicals:
The molecular formula of Potassium nitrate is KNO3, the CAS number is 7757-79-1 and the UN number is 1486.
Its main Specifications are normally industrial grade and agricultural grade GB/T1918-1998, to better understand its parameter characteristics, we have created the following table:
| Inspection Items | Unit | Industrial Grade | Agricultural Grade |
| Purity | % Min | 99.8 | 97.5 |
| Moisture | % Max | 0.10 | – |
| Chloride (as CI-) | % Max | 0.01-0.03 | 0.8 |
| Sulphate (as SO4 2-) | % Max | 0.01 | – |
| Insoluble matter in water | % Max | 0.01 | – |
| Fe | % Max | 0.003 | – |
| Hygroscopicity | % Max | 0.25 | – |
| K 2 O | % Ma | – | 45.4 |
| Nitrogen (in nitrate) | % Min | – | 13.5 |
Potassium nitrate has characteristics of colorless and transparent rhomboidal crystals and/or white powder, its relative density is 2.109, and its melting point is at about 334°C. it decomposes at 400°C and turns into potassium nitrite releasing oxygen, and then in continuous heat turns into burnt potash; it is highly soluble in water, liquid ammonia, and glycerin but insoluble in anhydrous alcohol and ethyl ether.
But is not deliquesce in the air, as a strong oxidizer, it will burn and explode when meeting with organics releasing irritant gas, and if mixed with carbon power or sulfur, it also burns with strong light.
It is normally packed in a plastic woven bag or paper bag inner with a plastic bag in 20, 25, 50, 500, and 1000 kilograms net.
Any operators should wear a protective smock including a respirator mask and rubber gloves etc, be careful not to inhale the powder of potassium nitrate to protect the respiration apparatus.
When we handle and store the chemical of potassium nitrate, we should:
store it in a cool, ventilated, and dry warehouse, away from moisture, heat, or kindling, furthermore, avoid mixing with organic compound or sulfur or reducer during storage and transportation in case of explosion. And also protects the material from the sun and rain during transportation, and most importantly, carefully loads and unloads in case of any crash.
The molecular formula of strontium nitrate is Sr(NO3)2 with a CAS number of 10042-76-9 and UN number of 15075.1/PG3, its EINECS is 233-131-9.
For its main specifications, please refer to the standard of GB/T669-1994, correspondingly, the following table lists the chemical properties of strontium nitrate:
| Item | Quality Index | ||
| High Class | First Class | Qualified Class | |
| Purity | 99.3% Min | 99.0 % Min | 98.0% Min |
| Moisture | 0.05% Max | 0.1% Max | 0.5% Max |
| Calcium (Fe) | 0.05% Max | 0.1% Max | 0.5% Max |
| Iron (Fe) | 0.005% Max | 0.001% Max | 0.05% Max |
| Barium (Ba) | 0.05% Max | 0.1% Max | 0.5% Max |
| Water insoluble | 0.1% Max | 0.2% Max | 0.5% Max |
| Sodium (Na) | 0.1% Max | 0.2% Max | 0.5% Max |
It is a white crystal and powerful. The relative molecular weight is 211.63 and its density is 2.986. It is not deliquescent in the air and can dissolve in water and liquid ammonia, but not in ethanol and nitric acid.
The melting point is 570°C, it will decompose under high temperatures. It has a strong oxidizing property and can cause burning and explosion while meets the open fire it puts it together with organic substance and sulfur, and it gives out the carmine flame while burning.
Its packaging method is almost the same as that of potassium nitrate.
Its operating method is almost the same as potassium nitrate, see protection, handling, and storage methods of potassium nitrate.
It is mainly used to produce fireworks, signal flares, flame tubes, matches, TV kine-scope, analysis agents, optical glasses, medicine, as well as fire suppression agents.
In terms of application, some people may ask what kind of fire extinguishing agent it is. We explain that it is the latest generation of S-type aerosol fire-fighting system developed in China.
Note:
From the above comparisons and analyses, we can see that both substances can be used as the main oxidizing agent in aerosol fire suppression systems.
For apply in fire suppression purposes, the main differences are:
Now worldwide we call for new energy, such as new energy automobiles, new energy power, new energy electronics, new energy motors, solar panels, etc, The development theme around the world is new energy.
People need more clean and green energy, so now in the choice of extinguishing agent, absolutely the S-type aerosol compound is much more popular than K type aerosol compound in fire suppression fields.
Ten years ago we also produced K-type aerosol fire extinguishers, but now we are making an effort to research and develop type aerosol because the S-type aerosol is the market direction in the future, our company is already the leading manufacturer of S-type aerosol suppression systems in the China and global market.
From the above description and comparison in this paper, we get the following conclusions:
We have multiple different types of aerosol systems, please click on the first-page link to find the products you are interested in.


